TLV2381IDR
| Parameters | |
|---|---|
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 160 kHz |
| Max I/O Voltage | 4.5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV2381 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Elements | 1 |
| Operating Supply Current | 7μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 710mW |
| Output Current | 400μA |
| Slew Rate | 0.06V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 400μA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 160 kHz |
| Unity Gain BW-Nom | 160 kHz |
TLV2381IDR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Cut Tape (CT) case. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 4.5mV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using a supply current of 7μA , this buffer op amp will be able to operate. Op amp is a member of the 100dB's 100dB family. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 8V voltage. For packing the buffer amplifier, the TR-axis is adopted.
TLV2381IDR Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
TLV2381IDR Applications
There are a lot of Texas Instruments TLV2381IDR Instrumentational OP Amps applications.
- Video conversion and routing
- Radiation thermometry transducers
- Multimedia playback equipment
- Commercial audio systems
- Cinema or auditorium audio system
- Video data acquisition
- Industrial control system
- Semiconductor detectors
- PDA
- Band-stop filter
