TLV2382IDR

2 Channels 400μA per Channel 1pA 54 dB Instrumentational OP Amps 0.001μA 8V 2.7V~16V ±1.35V~8V TLV2382 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2382IDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 258
Description: 2 Channels 400μA per Channel 1pA 54 dB Instrumentational OP Amps 0.001μA 8V 2.7V~16V ±1.35V~8V TLV2382 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	710mW
Technology	BIMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLV2382
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Channels	2
Operating Supply Current	7μA
Nominal Supply Current	20μA
Power Dissipation	710mW
Output Current	400μA
Slew Rate	0.06V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	54 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~16V ±1.35V~8V
Output Current per Channel	400μA
Input Offset Voltage (Vos)	4.5mV
Bandwidth	160 kHz
Unity Gain BW-Nom	160 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.001μA
Power Supply Rejection Ratio (PSRR)	74dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16.5V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	160 kHz
Max I/O Voltage	4.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm

TLV2382IDR Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 4.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. An 7μA volt supply current is needed for this linear amplifier to operate. 100dB should be the voltage gain. There are a total of 2 channels available on the op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 8V voltage. For packing the buffer amplifier, the TR-axis is adopted.