TLV2401IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2401 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Channels | 1 |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 990nA |
| Power Dissipation | 710mW |
| Output Current | 200μA |
| Slew Rate | 0.0025V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 1.2mV |
| Bandwidth | 5.5 kHz |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0009μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0003μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 5.5 kHz |
| Max I/O Voltage | 1.2mV |
| Input Offset Current-Max (IIO) | 0.00025μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2401IDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Cut Tape (CT) case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 2.7V battery. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 1.2mV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 900nA, this op amp ic can operate. Voltage gain should remain at 120dB. There are a total of 1 channels available on the op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 8V. It is used TR to pack the op amps.
TLV2401IDR Features
8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2401IDR Applications
There are a lot of Texas Instruments TLV2401IDR Instrumentational OP Amps applications.
- Navigation
- Hand-held batteries
- Division circuits
- Television broadcasting equipment
- RF cable systems
- Vehicle electronics
- Instrumentation
- Power control
- Power transmission
- High speed sample
