TLV2402ID

2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 0.0009μA 8V 2.5V~16V ±1.25V~8V TLV2402 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2402ID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 753
Description: 2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 0.0009μA 8V 2.5V~16V ±1.25V~8V TLV2402 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Base Part Number	TLV2402
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Channels	2
Operating Supply Current	900nA
Nominal Supply Current	1.98μA
Power Dissipation	710mW
Output Current	200μA
Slew Rate	0.0025V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	63 dB
Current - Input Bias	100pA
Voltage - Supply, Single/Dual (±)	2.5V~16V ±1.25V~8V
Output Current per Channel	200μA
Input Offset Voltage (Vos)	1.2mV
Bandwidth	5.5 kHz
Unity Gain BW-Nom	5.5 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0009μA
Power Supply Rejection Ratio (PSRR)	100dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	17V
Voltage - Input Offset	390μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.0003μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	5.5 kHz
Max I/O Voltage	1.2mV
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes

TLV2402ID Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are located on this board. Please take in mind that op amp should be run at 2.7V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1.2mV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Operational amplifier can operate supply current at 900nA. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 8V.