TLV2402IDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2402 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Channels | 2 |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 1.98μA |
| Power Dissipation | 481mW |
| Output Current | 200μA |
| Slew Rate | 0.0025V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 1.2mV |
| Bandwidth | 5.5 kHz |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0009μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0003μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 5.5 kHz |
| Max I/O Voltage | 1.2mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2402IDGK Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 1.2mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 900nA . 120dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLV2402IDGK Features
8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2402IDGK Applications
There are a lot of Texas Instruments TLV2402IDGK Instrumentational OP Amps applications.
- Division circuits
- Radiation thermometry transducers
- Automation control systems
- Industrial control system
- Subtraction operation circuits
- Home audio systems
- Portable docking station
- Automatic control
- pH (acidity)
- High gain DC amplifier
