TLV2402IDGKRG4

2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 0.0009μA 8V 2.5V~16V ±1.25V~8V TLV2402 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2402IDGKRG4
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 317
Description: 2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 0.0009μA 8V 2.5V~16V ±1.25V~8V TLV2402 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	TLV2402
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Channels	2
Operating Supply Current	900nA
Nominal Supply Current	1.98μA
Output Current	200μA
Slew Rate	0.0025V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	63 dB
Current - Input Bias	100pA
Voltage - Supply, Single/Dual (±)	2.5V~16V ±1.25V~8V
Output Current per Channel	200μA
Input Offset Voltage (Vos)	390μV
Bandwidth	5.5 kHz
Unity Gain BW-Nom	5.5 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0009μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	17V
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.0003μA
Programmable Power	NO
Nominal Gain Bandwidth Product	5.5 kHz
Max I/O Voltage	1.2mV
Power	NO
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR

TLV2402IDGKRG4 Overview

Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 2.7V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 390μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 900nA, this op amp ic can operate. Maintain 120dB as the voltage gain. There are 2 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. As a result of this, the buffer amplifier is packed in TR.