TLV2422CPWR

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00015μA 5V 2.7V~10V ±1.35V~5V TLV2422 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2422CPWR
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 213
Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00015μA 5V 2.7V~10V ±1.35V~5V TLV2422 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Cut Tape (CT)
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	TLV2422
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Circuits	2
Operating Supply Current	100μA
Nominal Supply Current	150μA
Output Current	50mA
Slew Rate	0.02V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~10V ±1.35V~5V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	300μV
Bandwidth	52 kHz
Unity Gain BW-Nom	52 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00015μA
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Max I/O Voltage	2mV
Power	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2422CPWR Overview

The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. Op amp rates 300μV as input offset voltage. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. This op amp can operate from a supply current at 100μA. Maintain 120dB as the voltage gain. This op amp contains 2 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 5V. This linear amplifier pack is based on the TR axis. The LinCMOS? stands for the buffer op amp's serial number.