TLV2432IDG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 250μA |
| Power Dissipation | 725mW |
| Current - Output | 50mA |
| Slew Rate | 0.25 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 500 kHz |
| Gain Bandwidth Product | 550 kHz |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 119.55dB |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 5V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.35V |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Dual Supply Voltage | 3V |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLV2432IDG4 Overview
In order to protect the op amps, a SOIC case is used. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Rail/Tube case. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 3V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. Operational amplifier can operate supply current at 100μA. Voltage gain should remain at 119.55dB. A linear amplifier like this has 2 circuits on it. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. You should not use op amp above 85°C degrees. The operating supply voltage of the buffer op amp is rated at 5V. It is important to keep in mind that the power supply voltage of this electric component is below 10V, which is suitable. Over 2.7V is a recommended supply voltage for buffer ampsIt is recommended that you conduct this electronic part using the dual supply voltage of 5V.
TLV2432IDG4 Features
8 Pins
supply voltage of 3V
119.55dB voltage gain
TLV2432IDG4 Applications
There are a lot of Texas Instruments TLV2432IDG4 Instrumentational OP Amps applications.
- Precision measurement
- Laptop
- Gaming industry
- Power transmission
- Semiconductor detectors
- Home audio systems
- Strain gauges
- Portable media players
- Non-polarized electrodes
- Cinema or auditorium audio system
