TLV2434CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2434 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1.022W |
| Output Current | 50mA |
| Slew Rate | 0.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 500 kHz |
| Gain Bandwidth Product | 550kHz |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 119.55dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 12V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2434CD Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. It consists of a total of 14 pins in total. Please take in mind that this instrumentation amplifier should be run at 3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 14-pin op amp ic is included in the package. Op amp ic rates 2mV for input offset voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 100μA . You should keep the voltage gain at 119.55dB for the time being. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Op amp has total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 5V voltage. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLV2434CD Features
14 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2434CD Applications
There are a lot of Texas Instruments TLV2434CD Instrumentational OP Amps applications.
- Signal operation
- Industrial control system
- Biopotential
- Communication
- Proportional counter tubes
- Oscilloscopes
- Large motor controllers
- MP3
- Division circuits
- ECG equipment
