Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Base Part Number |
TLV2442 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Circuits |
2 |
Operating Supply Current |
750μA |
Nominal Supply Current |
2.2mA |
Output Current |
50mA |
Slew Rate |
1.4V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~10V ±1.35V~5V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
300μV |
Bandwidth |
1.75MHz |
Gain Bandwidth Product |
1.81MHz |
Unity Gain BW-Nom |
1810 kHz |
Voltage Gain |
119.55dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Max I/O Voltage |
2mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2442IDR Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 300μV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 750μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. For the packing of the instrumentation amplifier, TR is adopted. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLV2442IDR Features
8 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2442IDR Applications
There are a lot of Texas Instruments TLV2442IDR Instrumentational OP Amps applications.
- Precision measurement
- High-frequency data acquisition systems
- Wireless base stations
- Automatic control
- Multimedia playback equipment
- Power transmission
- Semiconductor detectors
- Strain gauges
- Band-stop filter
- Multiplication circuits