TLV2444AIPWRG4
| Parameters | |
|---|---|
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Max I/O Voltage | 950μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.2mm |
| Length | 5mm |
| Factory Lead Time | 1 Week |
| Width | 4.4mm |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Thickness | 1mm |
| Mounting Type | Surface Mount |
| Radiation Hardening | No |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| RoHS Status | ROHS3 Compliant |
| Surface Mount | YES |
| Lead Free | Lead Free |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | TLV2444 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Power Supplies | +-1.35/+-5/2.7/10V |
| Number of Circuits | 4 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 4.4mA |
| Output Current | 50mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 1.75MHz |
| Gain Bandwidth Product | 1.81MHz |
| Unity Gain BW-Nom | 1810 kHz |
| Voltage Gain | 119.55dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 12V |
TLV2444AIPWRG4 Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. Instrumentation amplifier is a part of Operational Amplifier. It has 14 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 300μV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 750μA can be used to operate this linear amplifier. The voltage gain should stay at 119.55dB. On this buffer amplifier, there are 4 circuits. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TR. In this case, LinCMOS? represents the instrumentation amplifiers' series number.
TLV2444AIPWRG4 Features
14 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2444AIPWRG4 Applications
There are a lot of Texas Instruments TLV2444AIPWRG4 Instrumentational OP Amps applications.
- Signal operation
- Semiconductor detectors
- Non-polarized electrodes
- Automation control systems
- Portable electronic products powered by batteries
- Industrial applications including automation
- earphone
- Automotive sensors
- High speed sample
- Strain gauges
