TLV2444CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2444 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Power Supplies | +-1.35/+-5/2.7/10V |
| Number of Channels | 4 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 4.4mA |
| Power Dissipation | 1.022W |
| Output Current | 50mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.75MHz |
| Gain Bandwidth Product | 1.81MHz |
| Unity Gain BW-Nom | 1810 kHz |
| Voltage Gain | 119.55dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 12V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2444CD Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 14 terminations. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 2mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. An 750μA volt supply current is needed for this linear amplifier to operate. 119.55dB should remain the voltage gain. On the buffer amps, there are 4 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 5V. The LinCMOS? represents the op amp's series number.
TLV2444CD Features
14 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2444CD Applications
There are a lot of Texas Instruments TLV2444CD Instrumentational OP Amps applications.
- Navigation
- Addition operation circuits
- Radiation thermometry transducers
- Subtraction operation circuits
- Measurements of Wheatstone bridge
- Ultrasound transducers
- Multimedia playback equipment
- Division circuits
- Professional videography
- Biopotential
