TLV2444IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2444 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Power Supplies | +-1.35/+-5/2.7/10V |
| Number of Circuits | 4 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 4.4mA |
| Output Current | 50mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 1.75MHz |
| Gain Bandwidth Product | 1.81MHz |
| Unity Gain BW-Nom | 1810 kHz |
| Voltage Gain | 119.55dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 12V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Max I/O Voltage | 2mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2444IDR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Cut Tape (CT) case is used to deliver the buffer op amp. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins on it. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 14 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 300μV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 750μA . Keeping the voltage gain at 119.55dB is the best course of action. There are 4 circuits on op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This linear amplifier pack is based on the TR axis. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLV2444IDR Features
14 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail
TLV2444IDR Applications
There are a lot of Texas Instruments TLV2444IDR Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Proportional counter tubes
- Multiplication circuits
- Division circuits
- Weighing systems
- Signal amplification
- Car stereo
- Exponential operation circuits
- pH (acidity)
- Digital cameras
