TLV2450AID

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2450 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2450AID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 421
Description: 10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2450 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Base Part Number	TLV2450
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	1
Operating Supply Current	23μA
Nominal Supply Current	42μA
Power Dissipation	710mW
Output Current	10mA
Slew Rate	0.11V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	500pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	1mV
Bandwidth	220 kHz
Unity Gain BW-Nom	200 kHz
Voltage Gain	103dB
Average Bias Current-Max (IIB)	0.007μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	300μV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.005μA
Programmable Power	NO
Max I/O Voltage	1mV
Length	4.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TLV2450AID Overview

In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 23μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 103dB for the time being. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V.