TLV2450AIDR

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2450 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2450AIDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 221
Description: 10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2450 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Base Part Number	TLV2450
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	1
Operating Supply Current	23μA
Nominal Supply Current	42μA
Power Dissipation	710mW
Output Current	10mA
Slew Rate	0.11V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	500pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	1mV
Bandwidth	220 kHz
Unity Gain BW-Nom	220 kHz
Voltage Gain	103dB
Average Bias Current-Max (IIB)	0.007μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	300μV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.005μA
Programmable Power	NO
Max I/O Voltage	1mV
Input Offset Current-Max (IIO)	0.00045μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2450AIDR Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. An 23μA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 103dB is the best course of action. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. An buffer amplifier is packed in a TR-shape according to the design.