Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.95mm |
Base Part Number |
TLV2450 |
Pin Count |
6 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Operating Supply Current |
23μA |
Nominal Supply Current |
42μA |
Power Dissipation |
425mW |
Output Current |
10mA |
Slew Rate |
0.11V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
500pA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
10mA |
Input Offset Voltage (Vos) |
1.5mV |
Bandwidth |
220 kHz |
Unity Gain BW-Nom |
220 kHz |
Voltage Gain |
103dB |
Average Bias Current-Max (IIB) |
0.007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Voltage - Input Offset |
300μV |
Low-Bias |
NO |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.005μA |
Programmable Power |
NO |
Max I/O Voltage |
1.5mV |
Input Offset Current-Max (IIO) |
0.00045μA |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2450CDBVR Overview
Op amp is packaged in SOT-23-6 case. There are two types of operational amplifiers in this circuit. A Cut Tape (CT) case is used for delivering the op amp. It is estimated that there will be 6 terminations in the next few months. Buffer amplifier has a total of 6 pins on it. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 6 pins. Op amp ic rates 1.5mV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at 0°C~70°C. Operational amplifier can operate supply current at 23μA. Maintain 103dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The linear amplifier consists of 1 different elements in total. The operating supply voltage of instrumentation amplifier is rated 3V voltage. As a result of this, the buffer amplifier is packed in TR.
TLV2450CDBVR Features
6 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2450CDBVR Applications
There are a lot of Texas Instruments TLV2450CDBVR Instrumentational OP Amps applications.
- Band-pass filter
- Biopotential
- Industrial applications including automation
- Hand-held batteries
- Instrumentation
- Wireless base stations
- Weak signal detection
- PDA
- Fast A/D and D/A converters
- Comparator