TLV2450IDBVR
| Parameters | |
|---|---|
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV2450 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 23μA |
| Nominal Supply Current | 42μA |
| Power Dissipation | 425mW |
| Output Current | 10mA |
| Slew Rate | 0.11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 220 kHz |
| Unity Gain BW-Nom | 220 kHz |
| Voltage Gain | 103dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 300μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Programmable Power | NO |
| Max I/O Voltage | 1.5mV |
| Input Offset Current-Max (IIO) | 0.00045μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 425mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
TLV2450IDBVR Overview
The linear amplifier is packaged in a SOT-23-6 case. Op amps are General Purpose types of amplifier on the chip. A Cut Tape (CT) case is used for delivering the op amp. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 6 pins are included on the operational amplifiers. There is an input offset voltage of 1.5mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 23μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 103dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. An buffer amplifier is packed in a TR-shape according to the design.
TLV2450IDBVR Features
6 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2450IDBVR Applications
There are a lot of Texas Instruments TLV2450IDBVR Instrumentational OP Amps applications.
- Test and measurement instruments
- Switching amplifier
- Precision measurement
- Information processing
- Hand-held batteries
- Digital cameras
- Video data acquisition
- Home audio systems
- Large motor controllers
- Biopotential
