Parameters |
Input Offset Voltage (Vos) |
1.5mV |
Bandwidth |
220 kHz |
Unity Gain BW-Nom |
220 kHz |
Voltage Gain |
103dB |
Average Bias Current-Max (IIB) |
0.007μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Voltage - Input Offset |
300μV |
Low-Bias |
NO |
Micropower |
YES |
Programmable Power |
NO |
Max I/O Voltage |
1.5mV |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Base Part Number |
TLV2451 |
Pin Count |
5 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Operating Supply Current |
23μA |
Nominal Supply Current |
42μA |
Power Dissipation |
385mW |
Output Current |
10mA |
Slew Rate |
0.11V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
500pA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
10mA |
TLV2451CDBVR Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 5 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Operational amplifier can operate supply current at 23μA. There should be no change in the voltage gain at 103dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 3V voltage. This linear amplifier pack is based on the TR axis.
TLV2451CDBVR Features
5 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2451CDBVR Applications
There are a lot of Texas Instruments TLV2451CDBVR Instrumentational OP Amps applications.
- pH (acidity)
- Television
- Displayers for aircraft and air transportation control systems
- Radar
- Logarithmic operation circuits
- Division circuits
- Portable docking station
- Vehicle electronics
- Weighing systems
- Band-pass filter