TLV2452IDGKRG4

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2452 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2452IDGKRG4
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 163
Description: 10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2452 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	TLV2452
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	23μA
Nominal Supply Current	84μA
Power Dissipation	481mW
Output Current	10mA
Slew Rate	0.11V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	500pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	220 kHz
Unity Gain BW-Nom	220 kHz
Voltage Gain	103dB
Average Bias Current-Max (IIB)	0.007μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	300μV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.005μA
Programmable Power	NO
Max I/O Voltage	1.5mV
Input Offset Current-Max (IIO)	0.00045μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2452IDGKRG4 Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 3V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 23μA supply current, this operational amplifier ics can be operated. 103dB should be the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage. TR is adopted to pack the instrumentation amplifier.