TLV2454AIN

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2454 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2454AIN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 450
Description: 10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2454 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	3V
Base Part Number	TLV2454
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	4
Power Supplies	+-1.35/+-3/2.7/6V
Operating Supply Current	23μA
Nominal Supply Current	168μA
Power Dissipation	1.6W
Output Current	10mA
Slew Rate	0.11V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	500pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	1mV
Bandwidth	220 kHz
Unity Gain BW-Nom	220 kHz
Voltage Gain	103dB
Average Bias Current-Max (IIB)	0.007μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	300μV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.005μA
Programmable Power	NO
Max I/O Voltage	1mV
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)

TLV2454AIN Overview

Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. A total of 14 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 14 pins. There is an input offset voltage of 1mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Through Hole. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 23μA. You should keep the voltage gain at 103dB for the time being. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V.