TLV2455ID

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2455 16 Pins 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2455ID
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 104
Description: 10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2455 16 Pins 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Base Part Number	TLV2455
Pin Count	16
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	4
Power Supplies	+-1.35/+-3/2.7/6V
Operating Supply Current	23μA
Nominal Supply Current	168μA
Power Dissipation	1.09W
Output Current	10mA
Slew Rate	0.11V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	500pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	220 kHz
Unity Gain BW-Nom	220 kHz
Voltage Gain	103dB
Average Bias Current-Max (IIB)	0.007μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	300μV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.005μA
Programmable Power	NO
Max I/O Voltage	1.5mV
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2455ID Overview

In the package, you will find a 16-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 16. A total of 16 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 16 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 1.5mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 23μA supply current, this operational amplifier ics can be operated. 103dB should remain the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There is a rating of 4 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 3V voltage.