TLV2455IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2455 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-3/2.7/6V |
| Operating Supply Current | 23μA |
| Nominal Supply Current | 168μA |
| Power Dissipation | 1.09W |
| Output Current | 10mA |
| Slew Rate | 0.11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 220 kHz |
| Unity Gain BW-Nom | 220 kHz |
| Voltage Gain | 103dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 300μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Programmable Power | NO |
| Max I/O Voltage | 1.5mV |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2455IDR Overview
A 16-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are located on this board. Please take in mind that op amp should be run at 3V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 16 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 23μA supply current, this operational amplifier ics can be operated. Maintain 103dB as the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TR.
TLV2455IDR Features
16 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2455IDR Applications
There are a lot of Texas Instruments TLV2455IDR Instrumentational OP Amps applications.
- Home audio systems
- Strain gauges
- Signal transformation
- Portable docking station
- Radiation thermometry transducers
- Non-polarized electrodes
- Thermocouples
- Gaming industry
- Inverse/same-phase proportional circuit
- Power transmission
