TLV2460AIDR
| Parameters | |
|---|---|
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 650μA |
| Power Dissipation | 710mW |
| Output Current | 80mA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 1.3nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 6.4MHz |
| Unity Gain BW-Nom | 5200 kHz |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Max I/O Voltage | 1.5mV |
| Input Offset Current-Max (IIO) | 0.007μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV2460 |
TLV2460AIDR Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Cut Tape (CT) case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 550μA , this buffer op amp will be able to operate. 109dB should be the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of instrumentation amplifier is rated 3V voltage. TR is adopted to pack the instrumentation amplifier.
TLV2460AIDR Features
8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2460AIDR Applications
There are a lot of Texas Instruments TLV2460AIDR Instrumentational OP Amps applications.
- Integrator circuits
- Navigation
- Scintillation detectors
- Medical instruments
- Multimedia playback equipment
- Test and measurement instruments
- Subtraction operation circuits
- Non-polarized electrodes
- High/low-pass filter circuit
- Portable media players
