TLV2460CDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV2460 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 650μA |
| Power Dissipation | 425mW |
| Output Current | 80mA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 71 dB |
| Current - Input Bias | 1.3nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 6.4MHz |
| Unity Gain BW-Nom | 6400 kHz |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.007μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2460CDBVTG4 Overview
The linear amplifier is packaged in a SOT-23-6 case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 6 terminations this year. Buffer amplifier has a total of 6 pins on it. I would like to remind you that this buffer op amp should be powered by an 3V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 6-pin op amp ic is included in the package. There is an input offset voltage of 2mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using an 550μA supply current, this operational amplifier ics can be operated. 109dB should remain the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. The linear amplifier is packaged by using a TR axis.
TLV2460CDBVTG4 Features
6 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2460CDBVTG4 Applications
There are a lot of Texas Instruments TLV2460CDBVTG4 Instrumentational OP Amps applications.
- Instrumentation
- Industrial control system
- High speed sample
- Hand-held batteries
- Information processing
- Active probe
- High-frequency data acquisition systems
- Mobile phone
- Semiconductor detectors
- Test and measurement instruments
