Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.95mm |
Base Part Number |
TLV2460 |
Pin Count |
6 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Operating Supply Current |
550μA |
Nominal Supply Current |
650μA |
Power Dissipation |
425mW |
Output Current |
80mA |
Slew Rate |
1.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
71 dB |
Current - Input Bias |
1.3nA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
6.4MHz |
Unity Gain BW-Nom |
6400 kHz |
Voltage Gain |
109dB |
Average Bias Current-Max (IIB) |
0.075μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
500μV |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.007μA |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2460IDBVR Overview
In the package, you will find a SOT-23-6-case to contain the op amp ic. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. A total of 6 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 3V. It should be noted that this op amp is a type of Operational Amplifier device. A total of 6 pins are present on the instrumentation amplifier. Op amp ic rates 2mV for input offset voltage. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 550μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 109dB at all times. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of instrumentation amplifier is rated 3V voltage. For the packing of the instrumentation amplifier, TR is adopted.
TLV2460IDBVR Features
6 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2460IDBVR Applications
There are a lot of Texas Instruments TLV2460IDBVR Instrumentational OP Amps applications.
- Signal amplification
- Weak signal detection
- Hand-held batteries
- Measurements of Wheatstone bridge
- Video data acquisition
- Radar
- Fast A/D and D/A converters
- Computer workstations
- Band-stop filter
- Portable media players