Parameters |
Lead Free |
Lead Free |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tray |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLV2460 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Circuits |
1 |
Operating Supply Current |
550μA |
Nominal Supply Current |
575μA |
Output Current |
80mA |
Slew Rate |
1.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
71 dB |
Current - Input Bias |
1.3nA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
500μV |
Bandwidth |
6.4MHz |
Unity Gain BW-Nom |
5200 kHz |
Voltage Gain |
109dB |
Average Bias Current-Max (IIB) |
0.075μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Max I/O Voltage |
2mV |
Power |
NO |
Length |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
TLV2460QPWG4 Overview
It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tray case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. A supply current of 550μA can be used to operate this linear amplifier. 109dB should remain the voltage gain. This op amp ic has 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage.
TLV2460QPWG4 Features
8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2460QPWG4 Applications
There are a lot of Texas Instruments TLV2460QPWG4 Instrumentational OP Amps applications.
- Information processing
- Gaming industry
- Proportional counter tubes
- Industrial applications including automation
- Test equipment
- Communication device
- ECG equipment
- Precision measurement
- High speed sample
- Strain gauges