TLV2461AIP

80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2461 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2461AIP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 128
Description: 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2461 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Output Current	80mA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1.3nA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	6.4MHz
Unity Gain BW-Nom	5200 kHz
Voltage Gain	109dB
Average Bias Current-Max (IIB)	0.075μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Max I/O Voltage	1.5mV
Input Offset Current-Max (IIO)	0.007μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	2.54mm
Base Part Number	TLV2461
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	1
Operating Supply Current	550μA
Nominal Supply Current	650μA
Power Dissipation	1.2W

TLV2461AIP Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 8 terminations. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 3V. It should be noted that this op amp is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. Op amp ic rates 1.5mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 550μA, this op amp ic can operate. Keeping the voltage gain at 109dB is the best course of action. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 3V voltage.