TLV2461AQPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2461 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 650μA |
| Output Current | 80mA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 1.3nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 6.4MHz |
| Unity Gain BW-Nom | 6400 kHz |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.000075μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Max I/O Voltage | 1.5mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.007μA |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2461AQPWRG4Q1 Overview
It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 3V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 550μA supply current, this operational amplifier ics can be operated. Op amp is a member of the 109dB's 109dB family. The buffer amp consists of 1 circuits in total. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. To pack the operational amplifier ics, TR is adopted as the packing method. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100 series.
TLV2461AQPWRG4Q1 Features
8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2461AQPWRG4Q1 Applications
There are a lot of Texas Instruments TLV2461AQPWRG4Q1 Instrumentational OP Amps applications.
- Automotive sensors
- Portable electronic products powered by batteries
- Subtraction operation circuits
- Weighing systems
- Computer workstations
- earphone
- Commercial audio systems
- Large motor controllers
- Displayers for aircraft and air transportation control systems
- High-frequency data acquisition systems
