TLV2461CP

1 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.025μA 3V 2.7V~6V ±1.35V~3V TLV2461 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2461CP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 513
Description: 1 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.025μA 3V 2.7V~6V ±1.35V~3V TLV2461 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	2.54mm
Base Part Number	TLV2461
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Channels	1
Operating Supply Current	550μA
Nominal Supply Current	650μA
Power Dissipation	1.2W
Output Current	80mA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1.3nA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	2mV
Bandwidth	5.2MHz
Gain Bandwidth Product	6.4MHz
Unity Gain BW-Nom	6400 kHz
Voltage Gain	109dB
Average Bias Current-Max (IIB)	0.025μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Max I/O Voltage	2mV
Input Offset Current-Max (IIO)	0.007μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2461CP Overview

It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 3V volts. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2mV voltage. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Using a supply current of 550μA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 109dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage.