TLV2462AIDR

2 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2462 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2462AIDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 643
Description: 2 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2462 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	710mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Base Part Number	TLV2462
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Channels	2
Operating Supply Current	550μA
Nominal Supply Current	1.3mA
Power Dissipation	710mW
Output Current	80mA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1.3nA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	6.4MHz
Unity Gain BW-Nom	6400 kHz
Voltage Gain	109dB
Average Bias Current-Max (IIB)	0.075μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.014μA
Programmable Power	NO
Max I/O Voltage	1.5mV
Input Offset Current-Max (IIO)	0.007μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2462AIDR Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 550μA . You should keep the voltage gain at 109dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. An buffer amplifier is packed in a TR-shape according to the design.