Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Base Part Number |
TLV2462 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Channels |
2 |
Operating Supply Current |
550μA |
Nominal Supply Current |
1.3mA |
Power Dissipation |
710mW |
Output Current |
80mA |
Slew Rate |
1.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
66 dB |
Current - Input Bias |
1.3nA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
6.4MHz |
Unity Gain BW-Nom |
6400 kHz |
Voltage Gain |
109dB |
Average Bias Current-Max (IIB) |
0.075μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
500μV |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.014μA |
Programmable Power |
NO |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.007μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2462ID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 3V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 550μA, this op amp ic can operate. 109dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 3V voltage.
TLV2462ID Features
8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2462ID Applications
There are a lot of Texas Instruments TLV2462ID Instrumentational OP Amps applications.
- Hand-held batteries
- Band-stop filter
- Signal transformation
- Thermocouples
- Radiation thermometry transducers
- High gain DC amplifier
- Automotive sensors
- Blood pressure sensors
- Ultrasound transducers
- Signal amplification