Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLV2462 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Elements |
2 |
Operating Supply Current |
550μA |
Output Current |
80mA |
Supply Current-Max |
1.3mA |
Slew Rate |
1.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
71 dB |
Current - Input Bias |
1.3nA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
2mV |
Gain Bandwidth Product |
6.4MHz |
Unity Gain BW-Nom |
6400 kHz |
Voltage Gain |
109dB |
Average Bias Current-Max (IIB) |
0.000075μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
150μV |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.014μA |
Programmable Power |
NO |
Wideband |
NO |
Power |
NO |
Input Offset Current-Max (IIO) |
0.007μA |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2462QDGKRQ1 Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 550μA, this op amp ic can operate. 109dB should be the voltage gain. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 2. A TR-shaped amplifier is used to pack the buffer amps. The Automotive, AEC-Q100 represents the op amp's series number.
TLV2462QDGKRQ1 Features
8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2462QDGKRQ1 Applications
There are a lot of Texas Instruments TLV2462QDGKRQ1 Instrumentational OP Amps applications.
- Television
- High gain DC amplifier
- Portable media players
- Image computer boards
- Digital cameras
- Differentiator circuits
- earphone
- Displayers for aircraft and air transportation control systems
- Communication device
- Division circuits