TLV2462QPWRG4Q1

80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.000075μA 3V 2.7V~6V ±1.35V~3V TLV2462 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2462QPWRG4Q1
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 635
Description: 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.000075μA 3V 2.7V~6V ±1.35V~3V TLV2462 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	TLV2462
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	550μA
Nominal Supply Current	1.3mA
Output Current	80mA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1.3nA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	2mV
Gain Bandwidth Product	6.4MHz
Unity Gain BW-Nom	6400 kHz
Voltage Gain	109dB
Average Bias Current-Max (IIB)	0.000075μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	150μV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.014μA
Programmable Power	NO
Max I/O Voltage	2mV
Wideband	NO
Power	NO
Input Offset Current-Max (IIO)	0.007μA
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2462QPWRG4Q1 Overview

Packaged in a 8-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 2mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Operational amplifier can operate supply current at 550μA. There should be no change in the voltage gain at 109dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of the buffer op amp is rated at 3V. The linear amplifier is packaged by using a TR axis. Automotive, AEC-Q100 corresponds to the op amp's series.