TLV2463CDGS

80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 3V 2.7V~6V ±1.35V~3V TLV2463 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2463CDGS
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 190
Description: 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 3V 2.7V~6V ±1.35V~3V TLV2463 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Base Part Number	TLV2463
Pin Count	10
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	550μA
Nominal Supply Current	1.3mA
Power Dissipation	485mW
Output Current	80mA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1.3nA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	2mV
Bandwidth	6.4MHz
Unity Gain BW-Nom	6400 kHz
Voltage Gain	109dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.014μA
Programmable Power	NO
Max I/O Voltage	2mV
Input Offset Current-Max (IIO)	0.007μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2463CDGS Overview

Op amp is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 10. Buffer amplifier has a total of 10 pins on it. Please take in mind that this instrumentation amplifier should be run at 3V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 10 pins on it. There is an input offset voltage of 2mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . As long as the supply current of the chip does not exceed 550μA, this op amp ic can operate. There should be no change in the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The total number of elements in this buffer amplifier is 2. The operating supply voltage of instrumentation amplifier is rated 3V voltage.