Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
3V |
Base Part Number |
TLV2463 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Elements |
2 |
Operating Supply Current |
550μA |
Nominal Supply Current |
1.3mA |
Power Dissipation |
1.6W |
Output Current |
80mA |
Slew Rate |
1.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
66 dB |
Current - Input Bias |
1.3nA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
6.4MHz |
Unity Gain BW-Nom |
6400 kHz |
Voltage Gain |
109dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
500μV |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.007μA |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2463CN Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 14. In this case, there are 14 pins on the board. I would like to remind you that this buffer op amp should be powered by an 3V battery. It should be noted that this op amp is a type of Operational Amplifier device. There are 14 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. This electronic component is recommended to be mounted using the mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . You can run this op amp ic on 550μA . There should be no change in the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The linear amplifier consists of 2 different elements in total. The operating supply voltage of instrumentation amplifier is rated 3V voltage.
TLV2463CN Features
14 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2463CN Applications
There are a lot of Texas Instruments TLV2463CN Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Radiation thermometry transducers
- PDA
- Gaming industry
- High speed sample
- High gain DC amplifier
- Signal operation
- Navigation
- Medical instruments
- Automation control systems