TLV2463IDGSG4

80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2463 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2463IDGSG4
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 575
Description: 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2463 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Base Part Number	TLV2463
Pin Count	10
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	550μA
Nominal Supply Current	1.3mA
Power Dissipation	485mW
Output Current	80mA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1.3nA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	2mV
Bandwidth	6.4MHz
Unity Gain BW-Nom	5200 kHz
Voltage Gain	109dB
Average Bias Current-Max (IIB)	0.075μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.014μA
Programmable Power	NO
Max I/O Voltage	2mV
Input Offset Current-Max (IIO)	0.007μA
Height	1.02mm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2463IDGSG4 Overview

Packaging for the buffer amplifier is in the form of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 10. A total of 10 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 10 pins. The input offset voltage is 2mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 550μA and 10 . 109dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 3V voltage.