Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 20 hours ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Base Part Number |
TLV2464 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Channels |
1 |
Number of Circuits |
4 |
Operating Supply Current |
550μA |
Nominal Supply Current |
2.6mA |
Output Current |
80mA |
Slew Rate |
1.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
71 dB |
Current - Input Bias |
1.3nA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
1.5mV |
Bandwidth |
5.2MHz |
Gain Bandwidth Product |
6.4MHz |
Unity Gain BW-Nom |
6400 kHz |
Voltage Gain |
109dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
150μV |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Max I/O Voltage |
1.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.007μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2464AMDREP Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 14. Buffer amplifier has a total of 14 pins. Please take in mind that op amp should be run at 3V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are included on the operational amplifiers. The input offset voltage is 1.5mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . It is possible to operate this buffer amplifier from a supply current of 550μA . Keeping the voltage gain at 109dB is the best course of action. On this buffer amplifier, there are 4 circuits. Op amp ic has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TR.
TLV2464AMDREP Features
14 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2464AMDREP Applications
There are a lot of Texas Instruments TLV2464AMDREP Instrumentational OP Amps applications.
- MP3
- High speed sample
- Proportional counter tubes
- Television broadcasting equipment
- Proportional operation circuits
- Laptop
- Television
- Multiplication circuits
- Industrial control system
- Communication