TLV2464CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | TLV2464 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-3/2.7/6V |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 2.6mA |
| Power Dissipation | 1.6W |
| Output Current | 80mA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 1.3nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 6.4MHz |
| Unity Gain BW-Nom | 6400 kHz |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.007μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2464CN Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 14-pin op amp ic is included in the package. The input offset voltage is 2mV. For this electrical component, Through Hole is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Using a supply current of 550μA , this buffer op amp will be able to operate. Maintain 109dB as the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. There are 4 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V.
TLV2464CN Features
14 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2464CN Applications
There are a lot of Texas Instruments TLV2464CN Instrumentational OP Amps applications.
- Blood pressure sensors
- Differentiator circuits
- Tablets
- Laptop
- Communication
- Video computer boards
- PDA
- Subtraction operation circuits
- Medical imaging
- Power control
