TLV2471AQDRG4Q1

35mA per Channel 2.5pA 58 dB Instrumentational OP Amps 0.0003μA 3V 2.7V~6V ±1.35V~3V TLV2471 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2471AQDRG4Q1
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 923
Description: 35mA per Channel 2.5pA 58 dB Instrumentational OP Amps 0.0003μA 3V 2.7V~6V ±1.35V~3V TLV2471 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Base Part Number	TLV2471
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	1
Operating Supply Current	600μA
Nominal Supply Current	900μA
Power Dissipation	710mW
Output Current	35mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	58 dB
Current - Input Bias	2.5pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	35mA
Input Offset Voltage (Vos)	1.6mV
Bandwidth	2.8MHz
Unity Gain BW-Nom	2800 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0003μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Max I/O Voltage	1.6mV
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2471AQDRG4Q1 Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 1.6mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 600μA . 120dB should be the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 3V voltage. TR is adopted to pack the instrumentation amplifier. Automotive, AEC-Q100 corresponds to linear amplifier's series.