TLV2471QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV2471 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 900μA |
| Power Dissipation | 385mW |
| Output Current | 35mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 2.5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 2.2mV |
| Unity Gain BW-Nom | 2800 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.8MHz |
| Max I/O Voltage | 2.2mV |
| Wideband | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2471QDBVRQ1 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. There are a total of 5 pins on this op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. 5 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2.2mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 600μA can be used to operate this linear amplifier. The voltage gain should stay at 120dB. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V. A TR-shaped amplifier is used to pack the buffer amps. Automotive, AEC-Q100 corresponds to linear amplifier's series.
TLV2471QDBVRQ1 Features
5 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2471QDBVRQ1 Applications
There are a lot of Texas Instruments TLV2471QDBVRQ1 Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Polarized electrodes
- High speed sample
- Tablets
- Precision measurement
- Portable media players
- Band-stop filter
- Active probe
- Broadcasting
- single/dual op amp sum and difference circuits
