TLV2472AID

2 Channels 35mA per Channel 2.5pA 61 dB Instrumentational OP Amps 0.0003μA 3V 2.7V~6V ±1.35V~3V TLV2472 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2472AID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 354
Description: 2 Channels 35mA per Channel 2.5pA 61 dB Instrumentational OP Amps 0.0003μA 3V 2.7V~6V ±1.35V~3V TLV2472 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Base Part Number	TLV2472
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Channels	2
Operating Supply Current	600μA
Nominal Supply Current	1.8mA
Power Dissipation	710mW
Output Current	35mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	61 dB
Current - Input Bias	2.5pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	35mA
Input Offset Voltage (Vos)	1.6mV
Bandwidth	2.8MHz
Unity Gain BW-Nom	2800 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0003μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Max I/O Voltage	2.2mV
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C

TLV2472AID Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 1.6mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 600μA supply current, this operational amplifier ics can be operated. 120dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 3V.