TLV2472AQDRG4Q1
| Parameters | |
|---|---|
| Bandwidth | 2.8MHz |
| Unity Gain BW-Nom | 2800 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Max I/O Voltage | 1.6mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2472 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 710mW |
| Output Current | 35mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 2.5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 1.6mV |
TLV2472AQDRG4Q1 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. The input offset voltage is 1.6mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureA supply current of 600μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 120dB at all times. On the output type, there are Rail-to-Rail different types of op amps. There are a total of 2 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage. TR is adopted to pack the instrumentation amplifier. Buffer op amp series numbers are indicated by the Automotive, AEC-Q100.
TLV2472AQDRG4Q1 Features
8 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2472AQDRG4Q1 Applications
There are a lot of Texas Instruments TLV2472AQDRG4Q1 Instrumentational OP Amps applications.
- Micro signal measurement
- Radar
- Active probe
- Measurements of Wheatstone bridge
- Professional videography
- Vehicle electronics
- Broadcasting
- High gain DC amplifier
- Tablets
- Voltage regulation circuit
