Parameters |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLV2472 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Elements |
2 |
Operating Supply Current |
600μA |
Nominal Supply Current |
1.8mA |
Power Dissipation |
2.37W |
Output Current |
35mA |
Slew Rate |
1.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
61 dB |
Current - Input Bias |
2.5pA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
35mA |
Input Offset Voltage (Vos) |
2.2mV |
Bandwidth |
2.8MHz |
Unity Gain BW-Nom |
2800 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Voltage - Input Offset |
250μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Max I/O Voltage |
2.2mV |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
TLV2472CDGNR Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. An op amp of this type is a General Purpose-type. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 2.2mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at 0°C~70°C. An 600μA volt supply current is needed for this linear amplifier to operate. Maintain 120dB as the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 3V voltage. It is used TR to pack the op amps.
TLV2472CDGNR Features
8 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2472CDGNR Applications
There are a lot of Texas Instruments TLV2472CDGNR Instrumentational OP Amps applications.
- High gain DC amplifier
- Comparator
- earphone
- Television
- Laptop
- High-frequency data acquisition systems
- High/low-pass filter circuit
- Medical imaging
- Cinema or auditorium audio system
- Proportional operation circuits