TLV2472CP

35mA per Channel 2.5pA 61 dB Instrumentational OP Amps 0.0001μA 3V 2.7V~6V ±1.35V~3V TLV2472 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2472CP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 975
Description: 35mA per Channel 2.5pA 61 dB Instrumentational OP Amps 0.0001μA 3V 2.7V~6V ±1.35V~3V TLV2472 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	3V
Base Part Number	TLV2472
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	600μA
Nominal Supply Current	1.8mA
Power Dissipation	1.2W
Output Current	35mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	61 dB
Current - Input Bias	2.5pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	35mA
Input Offset Voltage (Vos)	2.2mV
Bandwidth	2.8MHz
Unity Gain BW-Nom	2800 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	NO
Max Frequency	10kHz
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Max I/O Voltage	2.2mV
Input Offset Current-Max (IIO)	0.00005μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2472CP Overview

Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 3V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2.2mV. Through Hole is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Operational amplifier can operate supply current at 600μA. Maintain 120dB as the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. The total number of elements in this buffer amplifier is 2. The operating supply voltage of instrumentation amplifier is rated 3V voltage.