banner_page

TLV2472ID

2 Channels 35mA per Channel 2.5pA 61 dB Instrumentational OP Amps 0.0003μA 3V 2.7V~6V ±1.35V~3V TLV2472 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV2472ID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 338
  • Description: 2 Channels 35mA per Channel 2.5pA 61 dB Instrumentational OP Amps 0.0003μA 3V 2.7V~6V ±1.35V~3V TLV2472 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Base Part Number TLV2472
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 3V
Number of Channels 2
Operating Supply Current 600μA
Nominal Supply Current 1.8mA
Power Dissipation 710mW
Output Current 35mA
Slew Rate 1.5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 61 dB
Current - Input Bias 2.5pA
Voltage - Supply, Single/Dual (±) 2.7V~6V ±1.35V~3V
Output Current per Channel 35mA
Input Offset Voltage (Vos) 2.2mV
Bandwidth 2.8MHz
Unity Gain BW-Nom 2800 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.0003μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Voltage - Input Offset 250μV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00005μA
Programmable Power NO
Max I/O Voltage 2.2mV
Input Offset Current-Max (IIO) 0.00005μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV2472ID Overview


In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 2.2mV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 600μA , this buffer op amp will be able to operate. You should keep the voltage gain at 120dB for the time being. 2 channels are available on the instrumentation amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3V.

TLV2472ID Features


8 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail

TLV2472ID Applications


There are a lot of Texas Instruments TLV2472ID Instrumentational OP Amps applications.

  • Car stereo
  • Fast A/D and D/A converters
  • Weighing systems
  • Comparator
  • Scintillation detectors
  • Oscilloscopes
  • Power transmission
  • Division circuits
  • Automatic control
  • Logarithmic operation circuits

Write a review

Note: HTML is not translated!
    Bad           Good