Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLV2474 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Elements |
4 |
Power Supplies |
+-1.35/+-3/2.7/6V |
Operating Supply Current |
600μA |
Nominal Supply Current |
3.6mA |
Power Dissipation |
1.022W |
Output Current |
35mA |
Slew Rate |
1.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
61 dB |
Current - Input Bias |
2.5pA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
35mA |
Input Offset Voltage (Vos) |
1.6mV |
Bandwidth |
2.8MHz |
Unity Gain BW-Nom |
2800 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0003μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Voltage - Input Offset |
250μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Max I/O Voltage |
1.6mV |
Input Offset Current-Max (IIO) |
0.00005μA |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2474AIDRG4 Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 3V volts. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 14 pins. Regarding input offset voltage, buffer amplifier rates 1.6mV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 600μA. It is a member of the 120dB's 120dB family. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The total number of elements in this buffer amplifier is 4. The operating supply voltage of instrumentation amplifier is rated 3V voltage. A TR-shaped amplifier is used to pack the buffer amps.
TLV2474AIDRG4 Features
14 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2474AIDRG4 Applications
There are a lot of Texas Instruments TLV2474AIDRG4 Instrumentational OP Amps applications.
- Blood pressure sensors
- Semiconductor detectors
- Subtraction operation circuits
- earphone
- Thermocouples
- Addition operation circuits
- Weighing systems
- Automation control systems
- Proportional operation circuits
- Mobile phone