TLV2621IDR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV2621 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1mA |
| Output Current | 28mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 28mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 11MHz |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Max I/O Voltage | 3.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2621IDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 250μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 800μA . It is recommended to keep the voltage gain at 100dB at all times. On this instrumentation amplifier, there are 1 circuits that are connected together. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. An buffer amplifier is packed in a TR-shape according to the design.
TLV2621IDR Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
TLV2621IDR Applications
There are a lot of Texas Instruments TLV2621IDR Instrumentational OP Amps applications.
- Home audio systems
- Communication
- Subtraction operation circuits
- Vehicle electronics
- Communication device
- High speed sample
- Band-pass filter
- Proportional counter tubes
- Integrator circuits
- Television
