TLV2622ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLV2622 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 710mW |
| Output Current | 28mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 28mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 11MHz |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Max I/O Voltage | 3.5mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2622ID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 3.5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. A supply current of 800μA can be used to operate this linear amplifier. The voltage gain should stay at 100dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 2 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage.
TLV2622ID Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
TLV2622ID Applications
There are a lot of Texas Instruments TLV2622ID Instrumentational OP Amps applications.
- Scintillation detectors
- Ultrasound transducers
- single/dual op amp sum and difference circuits
- Video data acquisition
- Inverse/same-phase proportional circuit
- Proportional counter tubes
- Medical imaging
- Commercial audio systems
- Multimedia playback equipment
- Division circuits
