TLV2622IDGKR

28mA per Channel 2pA 77 dB Instrumentational OP Amps 2.75V 2.7V~5.5V ±1.35V~2.75V TLV2622 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2622IDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 812
Description: 28mA per Channel 2pA 77 dB Instrumentational OP Amps 2.75V 2.7V~5.5V ±1.35V~2.75V TLV2622 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 22 hours ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	481mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	TLV2622
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Elements	2
Power Supplies	3/5V
Operating Supply Current	800μA
Nominal Supply Current	2mA
Power Dissipation	481mW
Output Current	28mA
Slew Rate	7V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	77 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	28mA
Input Offset Voltage (Vos)	3.5mV
Bandwidth	11MHz
Unity Gain BW-Nom	11000 kHz
Voltage Gain	100dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Nominal Gain Bandwidth Product	11MHz
Max I/O Voltage	3.5mV
Input Offset Current-Max (IIO)	0.00005μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2622IDGKR Overview

In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. There is an input offset voltage of 3.5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 800μA. The voltage gain should stay at 100dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. TR is adopted to pack the instrumentation amplifier.