TLV2624ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2624 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1.022W |
| Output Current | 28mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 28mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 11MHz |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Max I/O Voltage | 3.5mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2624ID Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 14 pins on this chip. There is an input offset voltage of 3.5mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using a supply current of 800μA , this buffer op amp will be able to operate. 100dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The total number of elements in this buffer amplifier is 4. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage.
TLV2624ID Features
14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
TLV2624ID Applications
There are a lot of Texas Instruments TLV2624ID Instrumentational OP Amps applications.
- Signal operation
- Professional videography
- Subtraction operation circuits
- Laptop
- Measurements of Wheatstone bridge
- Portable docking station
- Tablets
- Weighing systems
- Automation control systems
- Video data acquisition
